10M/250m transmission 10/100M 10-port PoE switch ONV-H1108PL
ONV-H1108PL
Price : 3,990THB

Unmanaged PoE switch with 8*10/100M PoE ports and 2*10/100M uplink RJ45 ports. Port 1-8 can support IEEE802.3af/at PoE standard. Adjust function switch, Port 1-8 can support 10M/250m transmission. Built-in 120W power supply
OVERVIEW


The ONV-H1108PL is a 10/100Mbps unmanaged PoE switch independently developed by ONV. It has 8*10/100M PoE ports and 2*10/100M uplink RJ45 ports, Port 1-8 can support IEEE802.3af/at standard PoE, single port PoE power up to 30W, and the maximum POE output power is 120W. As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, webcam, VoIP phone, video access control intercom, etc. through network cable to meet the network environment that needs high-density PoE power supply. It is suitable for hotels, campuses, factory quarters and small and medium-sized enterprises to form an economy. Efficient network.
 Unmanaged model, plug and play, no configuration, easy to use.

 
FEATURE


10/100Mbps access, Dual RJ45 port uplink
◇ Provides 8*10/100Base-TX RJ45 ports and 2*10/100Base-TX RJ45 ports for flexible networking and meets the networking requirements of various scenarios.
◇ All ports support non-blocking wire-speed forwarding for smoother transmission.
◇ Support IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow control.
 
Intelligent PoE power supply
◇ 8*10/100Base-TX RJ45 ports, meeting the needs of security monitoring, teleconferencing system, wireless coverage, and other scenarios.
◇ IEEE802.3af/at PoE standard, without damaging non-PoE devices.
◇ Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.
 
Innovative function
◇ Long distance mode: When opening, the speed of port 1-8 is reduced to 10M. With the existing twisted pair cable, the transmission limit of the twisted pair line can be broken, and the transmission distance can reach 250 meters; on the other hand, It can solve the problem of poor transmission caused by line aging.
◇ Video monitoring mode: When opening, Port 1-8 is isolated from each other but communicate with port 9-10 to prevent DHCP conflicts, optimize port cache utilization, and reduce broadcast storms.
 
Stable and reliable, easy tuse
◇ CCC,CE, FCC, RoHS.
◇ Plug and play, no configuration, simple and convenient.
◇ Low power consumption, galvanized steel casing, no fan.
◇ The user-friendly panel, it can show the device status through the LED indicator of PWR, Link/Act, PoE.
◇ Self-developed power supply, high redundancy design, providing a long term and stable PoE power output.
 
Model ONV-H1064PL ONV-H1108PL
Interface Characteristics
Fixed Port 4*10/100Base-TX PoE ports (Data/Power)
2*10/100Base-TX uplink RJ45 ports (Data)
8*10/100Base-TX PoE ports (Data/Power)
2*10/100Base-TX uplink RJ45 ports (Data)
Ethernet Port Port 1-6/1-10 can support 10/100Base-TX auto-detection, full/half-duplex MDI/MDI-X auto-sensing
Functional Switch
 
1*(Extend+VLAN)
Note:When the switch state changes, it must be restarted before the PoE switch function can take effect
Twisted Pair Transmission 10BASE-TX: Cat5 or later UTP(≤250 meter)
100BASE-TX: Cat5 or later UTP(≤100 meter)
Chip Parameter
Network Protocol IEEE802.3 10BASE-T, IEEE802.3i 10Base-T
IEEE802.3u 100Base-TX, IEEE802.3x
Forwarding Mode Store and Forward(Full Wire Speed)
Switching Capacity 1.6Gbps (Non-blocking) 2Gbps (Non-blocking)
Forwarding
Rate@64byte
0.98Mpps 1.488Mpps
MAC 1K
Buffer Memory 768K
Jumbo Frame 9.6K
LED Indicator Power:PWR (Green), network : L/A(Yellow), PoE : PoE (Green)
Functional switch: EXTEND (Green)
PoE & Power Supply
PoE Port Port 1 to 4 Port 1 to 8
Power Supply Pin Default 1/2(+), 3/6(-)
Max Power Per Port 30WIEEE802.3af/at
Total PWR / Input Voltage 65W/ (AC100-240V) 120W/ (AC100-240V)
Power Consumption Standby<3WFull load <65W Standby <5WFull load <120W
Power Supply Built-in power supply, AC100~240V 50-60Hz 1A Built-in power supplyAC100~240V 50-60Hz 2.2A
Physical Parameter
Operation TEMP / Humidity -20~+55°C;5%~90% RH Non condensing
Storage TEMP / Humidity -40~+75°C;5%~95% RH Non condensing
Dimension (L*W*H) 140*115*40mm 195*130*40mm
Net /Gross Weight <0.6kg / <1kg <0.8kg / <1.2kg
Installation Desktop, wall-mounted
Certification & Warranty
Lightning Protection / Protection Level Lightning protection: 4KV 8/20us, Protection level: IP30
Certification CCC, CE mark, commercialCE/LVD EN60950
FCC Part 15 Class BRoHS
Warranty 1 year, lifelong maintenance.

 
CLOSE